Importance and Significance of Radon Mitigation

radon mitigation

Radon is a highly discrete inert gas that belongs to the class of noble gases. It is called a discrete gas due to its characteristics and properties of being colorless, odorless as well as tasteless. It naturally which means that the sources of production of radon are purely natural and it cannot be prepared in the laboratory by artificial or commercial means. It occurs in the atmosphere as well as in the water bodies in a very small and harmless fixation. And the amount of radon that is present in the atmosphere is harmless. There are two basic categories of radon mitigation depending upon the area which is targeted. These two types are:

  • Whereas in the case of mitigation of water the setup must be installed permanently as the water cannot be cleaned in a single attempt. The mitigation system is installed which cleans the water simultaneously prior to use.
  • The mitigation process of air is therefore simpler yet the disadvantage for it is that it must be repeated periodically to ensure a lower level of radon. However, since the water mitigation is simultaneous it does not need repetition.

The mitigation of air is simpler as compared to the mitigation of water. The basic reason for this is that the air can be cleaned all at once.

serious consequences issues:

It however becomes an issue that can cause serious consequences when this amount of radon exceeds a certain level. Since radon is a naturally occurring gas, therefore, it is produced naturally and the most significant sources of radon include the disintegration of radioactive elements. Along with the breakdown of other radioactive elements the decay of radon itself plays a vital role in the production of radon. When radon itself breaks down it produces a part of radiation and a part of elements that are known as radon daughter elements.When it has been verified that the concentration of radon in your surroundings is above the acceptable level then you need to move forward and arrange radon mitigation for your house.

Now one may be concerned about what should be done if there is an increase in the radon concentration around them? First of all confirmation is very important. This not only helps you determine whether you are facing the issue and also provides you with the exact concentration of radon. If the concentration is above the level of 4 picocuries per liter in air and 4000 picocuries per liter in water only then you need to be worried about radon poisoning. It is recommended that you perform the detection tests at least twice to be extremely sure that you actually are facing the issue of an increased concentration of radon.

Radon mitigation refers to the method that is involved in decreasing the concentration of radon in air or the water storage in the affected area. It is a fairly simple yet effective technique that has a very good success rate as well.