The extractor hood of our kitchen absorbs a lot of dirt every day, due to the fumes that it sucks while we cook for it is not surprising that after a time of use it can be damaged.
The extractor of the kitchen is possibly the appliance that works the most … and together with the oven, which we forget most when it comes to cleaning. But we make a mistake! The hood filters dirty air every time we cook, and that steam, along with the grease of the stew, stays in the hood, and dirt, diminishing its power and accumulating bacteria … The good news is that to avoid it, it will only need to be cleaned once per month, following these simple steps:
- Fill a pot with water and the juice of three lemons and put it to boil with the extractor on. The lemon vapour will help remove the grease from the filter.
- When finished, turn off and unplug the extractor. Remove the filters from the hood and let them rest in water with degreaser.
- Meanwhile, clean the bell inside with a cloth and bleach. We recommend perfumed with lemon, to neutralize the smells of the bell.
Make sure that the cloth you use is not soaked, but moist. Keep in mind that you are cleaning an electrical device, and no matter how much you are disconnected during the cleaning and there is no danger, we have to make sure it is dry when you turn it on.
If you feel that you are not able to clean extractor hood by yourself using the above tips then take help of some specialized Exhaust Cleaning Company in Phoenix region
Precautions before repairing your extractor hood
Each problem has a different solution; however, the recommended procedure for a person who is not an expert in the subject, who wants to try to solve it without the help of an expert technician, is the following:
The precautions prior to the repair of the extractor hood are to disconnect the extractor hood from the mains, put on appropriate electrician gloves to avoid direct contact with the parts and lift the hood to see inside.
Before dismantling anything else, it is important that we look carefully at the location of each of the pieces; if necessary, we will make an outline on a paper or photos, even, so that the subsequent assembly process is much simpler, faster and without errors.
There are very simple problems in which you will not even have to disassemble the bell, as for example is the case of the 2.a. where we only have to remove the filters and clean them in depth, so it identifies well what the symptom is and uses the logic before taking each step .
If you are in Phoenix, Arizona and looking for a recognized and experienced kitchen hood and exhaust company look no more because Phoenix Kitchen hood and cleaning company will take care of it. They are expert in what they do, and the experts can solve all your queries from time to time.
Phoenix Hood Cleaning
1915 West Granada Road
Phoenix, AZ 85009